Immergas Victrix Tera 28 V2 methane condensing boiler
The Kit consists of:
- Immergas Victrix Tera 28 V2 sealed chamber condensing boiler 28 kW methane - cod. 3.032928
- Immergas CAR V2 modulating chronothermostat - cod. 3.021395
- 6 x Angled thermostatic kit complete with 3/8 IVAR connections for radiators - cod. 520188SBRC
- 12 x TR 4430 Fitting for IVAR copper pipe with 12X1 connections for valves and lockshields - cod. 500157
THE BOILER
Sealed chamber natural gas boiler - 16.5 l/min.
28 kW – Ideal for heating up to 200 m2 with an average height of 2.7 m
The Immergas Victrix Tera condensing boiler it is one of the basic models of the brand which is renewed in terms of technology and design with the new Victrix Tera V2 range, placing itself among the most popular products on the market in the sector. It is an article with great balance, designed and built with the best technical solutions: condensing boilers consume up to 30% less gas than traditional boilers, fully respecting the limits on pollution. The great novelty of Victrix Tera V2 is given by the Hydrogen Ready technology: in fact the new Immergas condensing boiler is also able to operate with mixtures of 20% hydrogen, making it possible to considerably reduce the emission of CO2 and greenhouse gases in the environment as well as guaranteeing better efficiency from an energy point of view. It has a simple and particularly pleasant aesthetic, refined on the front panel which features a white dashboard cover surrounded by a gray border and a glossy user interface with a glass effect that gives a touch of elegance and modernity. It satisfies all types of installation because it is designed to be installed outdoors in places partially protected from the weather, recessed inside the special Immergas "Omni Container" (optional) or obviously indoors. It is equipped with IPX5D electrical protection and standard antifreeze up to -5 °C. VICTRIX TERA V2 is equipped with very modern electronics, capable of integrating with a solar panel system : the solar function prevents the circulator and burner from turning on for a time equal to the DHW delay value set in the parameters. It produces 14 l/min of domestic hot water with the new high efficiency exchanger which increases the seasonal efficiency up to 94% .
The lower panel is equipped with programming and control buttons with which it is possible to set all the boiler operating parameters, which can be viewed on the backlit liquid crystal display which communicates the active functions and any malfunctions. By purchasing the special SMARTECH PLUS wireless chronothermostat with Bluetooth technology (optional) separately, the boiler can be managed from your smartphone or tablet via the DOMINUS App.
Victrix Tera V2 fully complies with the ErP Directive (Energy Related Product) which dictates the requirements that all equipment that uses electricity and therefore Energy Efficiency must meet.
The compact dimensions allow it to be installed anywhere, even where spaces are limited. Furthermore, the new Victrix Tera V2 allows the recovery of old fireplaces with particularly small diameters.
GUARANTEED SAVINGS AND HIGH COMFORT
The Immergas Victrix Tera V2 condensing boiler is managed in all its functions by a microprocessor which, together with the other devices, allows for gas consumption to be always particularly low . It is equipped with a double exchanger ; the primary exchanger with single-tube coil in stainless steel for the heating function and the secondary exchanger in stainless steel with 14 plates for the DHW circuit. The combustion system is of the total premix type and uses a cylindrical steel burner ; it is equipped with a spark plug and ionization control. Thanks to its modern technology, the burner always guarantees a high combustion efficiency and always keeps the level of flue gas emissions low to limit pollution. The burner has an antifreeze function which automatically starts boiler operation if the temperature drops close to the zero point and protects it down to an external temperature of -5°C. The gas valve is of the double shutter pneumatic type, for maximum safety. The hydraulic unit includes a 3-way electric valve, the air separator and the high-efficiency, low-consumption type modulating circulator with the anti-freeze, anti-blocking system which automatically activates its operation when necessary. Even the fan for expelling the fumes has an automatic variable speed to help optimize combustion and reduce consumption. For combination with solar systems, the boiler is already equipped with a solar delay timer which delays the production of domestic hot water while waiting for that coming from the solar system.
The self-diagnosis system continuously monitors the operating parameters and combustion and always guarantees optimal boiler operation. With the External Probe (optional), the boiler can adjust its operation based on the variations in external temperatures and allows even greater gas savings.
DIMENSIONS
Height: 748mm - Width: 440mm - Depth: 253mm
Weight (empty): 33.4 kg.
WARRANTY
There The guarantee is the official Immergas one and has a duration of 2 years.
IMMERGAS CAR V2 MODULATING CHRONOTHERMOSTAT
The Immergas CAR V2 chronothermostat (modulating remote control) has been designed to guarantee ideal temperature conditions at any time of day or night for any single day of the week. Battery powered , its installation takes a few minutes: it is in fact connected to the boiler with only 2 cables, through which it receives and sends the regulation and control commands, and receives power. After installation, it is ready to work thanks to the pre-set program inside. According to his needs, the customer can modify the basic program as desired.
The CARv2 chronothermostat has 4 operating modes :
- Antifreeze mode : the boiler can only operate in the event of a room antifreeze request. In this state, the day, the current time, any operating anomalies and the room temperature are still displayed;
- Summer mode: the boiler is only enabled for the production of domestic hot water, excluding room heating.
- Winter mode : the boiler is enabled both for the production of domestic hot water and for space heating. In winter the CAR V2 can operate in automatic or manual mode;
- Cooling mode: the boiler is enabled for the production of domestic hot water and for the control of an external condensing unit (only for predisposed models) for cooling rooms.
DIMENSIONS (WxHxD ): 142 x 103 x 31 (mm)
WARRANTY
The guarantee is the official Immergas one and has a duration of 2 years.
IVAR THERMOSTATIC KIT WITH 3/8 CONNECTION ON THE RADIATOR
Composed of:
SERIES T1500 THERMOSTATIC HEAD FOR THERMOSTATIC AND THERMOSTATIC VALVES ON HEATING RADIATORS
The T1500 Series thermostatic head with built-in liquid sensor is used in combination with IVAR radiator valves.
Its pleasant design with clean lines allows it to integrate perfectly to complete any model of heating radiator and in any environment. It is mounted on the radiator water delivery management valve and replaces the water inlet adjustment knob; it is equipped with a liquid sensitive element of particular sensitivity which makes it extremely precise and reliable. The T1500 Series thermostatic head transforms the water flow adjustment knob of the radiator into a real object for controlling the room temperature . It is equipped with a graduated scale that indicates the COLD position (corresponding to 6.5 °C) and a further five intermediate adjustment positions with partials, each of which corresponds to a temperature that reaches up to 28 °C. It will therefore always be possible to easily set the desired temperature in the room where the radiator is installed. Contrary to the classic radiator valves which simply allow you to adjust the water inlet flow, the thermostatic head allows you to choose the desired temperature in the room so that, by continuously detecting the room temperature, it automatically adjusts the flow of water circulating in the radiator and keeps the temperature constant . The advantages can be found in the considerable comfort it offers as by mounting them on all the radiators it is possible to set the same temperature in all the rooms and no longer feel temperature differences between one room and another or it is possible to deliberately set different temperatures in the rooms and keep them that way. There is also immediate energy saving which involves the use of the thermostatic valve which, by automatically regulating the flow of water in the radiator, avoids useless waste of energy due to the usual bad adjustments of the manual valves. The control is complete with a temperature limiting device and a set temperature blocking device . It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C. The knob is a compound of PC and ABS in white RAL 9003, the ring nut is in nickel-plated brass, the cartridge and the control rod are in POM, the thermostat is liquid expansion. Installation is quick and easy; the dimensions are very small.
DIMENSIONS
Length: 77 mm - Diameter: 38 mm - Connection: M30 x 1.5
IVAR THERMOSTATIZABLE ANGLE VALVE WITH 3/8 CONNECTIONS FOR RADIATORS
The IVAR 3/8 angle valve with thermostatic option is mounted on heating radiators and has the function of managing the incoming flow of the system carrier liquid. It has a pleasant and discreet design that integrates well with all radiator models and in any environment. The IVAR 3/8 angle valve with thermostatic option expresses the particular care that IVAR dedicates to both the design and construction of the articles.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the valve body allow it to be installed on all radiator models.
The valve body is in chromed brass, the obturator control stem is in stainless steel for a particular efficiency and durability over time, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete of a rubber ring that allows it to be fixed without using additional gaskets or hydraulic hemp.
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
IVAR TEAM HOLDER WITH 3/8 CONNECTIONS FOR RADIATORS
The 3/8 IVAR angle lockshield is mounted on heating radiators and has the function of managing the outflow of the system carrier liquid and achieving perfect balance of the radiator in the heating system.
It has a pleasant and discreet design that integrates well with all radiator models and in any environment . The IVAR 3/8 angle lockshield expresses the particular care that IVAR dedicates to both the design and construction of the items.
The square shape allows it to be installed in all cases where the pipes are positioned on the same fixing wall as the radiator, the dimensions of the body allow it to be installed on all radiator models.
The lockshield body is in chromed brass, the internal components are in stainless steel for a particular efficiency and durability over time, the hydraulic seals already incorporated are in EPDM, the coupling union to the radiator connection thread is complete with a rubber ring which allows it to be fixed without using additional gaskets or hydraulic hemp, the cap is in white RAL 9003 ABS.
It can be used at ambient temperatures with a maximum limit of 50 °C; carrier fluid temperature range up to 100 °C.
Installation is quick and easy; the dimensions are very small. The connection to the heating system pipes must be carried out exclusively with IVAR fittings suitable for the type and size of the pipes.
WARRANTY
The guarantee is the official IVAR one and has a duration of 2 years.
TR 4430 FITTING FOR IVAR COPPER PIPE WITH 12X1 CONNECTIONS FOR VALVES AND LOCKSHIELDS
The IVAR copper pipe fitting is used to make the connection between the IVAR valve or lockshield valve and the 12X1 size copper pipe that feeds the heating radiators. The IVAR copper pipe fitting is made with particular constructional care.
The body is made of brass for greater efficiency and durability, the hydraulic seals already incorporated are made of EPDM, the hose ring is made of brass.
It can be used with a carrier fluid temperature range from 0 to 95°C and max operating pressure: 10 bar.
Installation is also quick because it does not require additional elements such as gaskets or hydraulic hemp; the dimensions are very small.
DIMENSIONS
Connections Ø 12X1 on the copper pipe.
WARRANTY
The guarantee is the official IVAR one and has a duration of 2 years.
